Hello everyone, today I would like to share with you some knowledge about Ubi Bear. It will also explain the instruction manual of Ubi Bear. The article may be too long. If it can happen to solve your current problem, If you are facing problems, don’t forget to pay attention to this site and start now!
Contents of this article
- What\’s wrong with Ubi Bear not turning on
- How to connect Ubi Bear to the Internet
- How to adjust the time on Ubi Bear
- How to connect Ubi to the Internet
- Bear Ubi Instructions
- a>
1. Why can’t Ubi Bear turn on?
First teach you how to solve the problem of not turning on the computer, three steps:
Also check whether the power switch is in the \”on\” state;
Or use a paper clip to push the reset button on the USB interface to restart the machine.
1. Check whether the product is connected to USB and connected to the power supply through the charger;
2. Check whether the USB is intact, the USB interface is intact, and the charger matches.
The solution to this problem needs to be considered from two aspects:
First, Check whether the data cable is intact. A damaged data cable cannot be connected to the computer normally;
Secondly, the USB port of the computer may have data attenuation, which may cause inability to connect to the computer. Identify.
2. How to connect Little Bear to the Internet
1. Little Bear There are two ways to connect to the Internet in Ubi.
2. First, Bear Ubi can connect to available wireless devices through Wi-Fi.network. It works by searching for nearby Wi-Fi networks and selecting an available one to connect to.
3. Secondly, Bear Ubi can also connect to other devices via Bluetooth to share the network. By pairing with other devices, Ubi Bear can access the Internet through the network connection of one of the devices. This way, Ubi Bear can easily connect to the network and enjoy online entertainment, learning, and various other features.
3. How to adjust the time in Ubi Bear
Long press Ubi After pressing the day button, the voice will prompt you to adjust the time. Then press the left and right buttons to adjust. After adjusting, press the middle button to confirm.
4. How to connect to the Internet in Ubi
1. To connect To connect to a network, first make sure you have an available Wi-Fi or Ethernet connection. In Ubi\’s settings menu, find the \”Network Settings\” option.
2. Select wireless network or wired network, and then enter your network name and password.
3. If it is a wireless network, make sure the distance between Ubi and the router is close enough. Once the correct network information is entered, Ubi will automatically connect to the network.
4. You can check the connection status in the settings menu to ensure that Ubi is successfully connected to the network.
5. Bear Ubi Instructions
Long press \” U\” key to enter the intercom mode. The intercom mode defaults to 1-to-1 intercom. When a \”beep\” sound is emitted, you can start intercom. Press the \”U\” key to start speaking, and the voice will be played simultaneously on the other bear. to exit, release the \”U\” key to stop talking.
OK, this is the end of the content about Ubi Bear and Ubi Bear instructions. I hope it will be helpful to everyone.
