Hello everyone, if you don’t know much about graco safety seats, it doesn’t matter. Today, this site will share with you the knowledge of graco safety seats, including graco safety seats. The chair installation problems will be analyzed for everyone, and I hope it can solve everyone\’s problems. Let\’s get started!
Contents of this article
- How to put the baby in the reverse direction of the Gray child safety seat
- graco safety seat installation
- Graco Nautilus safety seat Chair disassembly
- How to choose a safety seat
1. How to put the baby in the reverse position of the Gray child safety seat
1. Installation step one: reverse installation is still the old method. First, pull out the seat belt as much as possible, and do not let the seat belt return in any way.
2. Installation step 2: In order to make it easier to distinguish, let\’s call the two blue fixing clips No. 1 and No. 2 respectively. We passed the safety belt between the No. 1 and No. 2 retaining clips and fixed it, completing the first step.
3. Installation step three: Move the seat belt buckle down, and then pass the seat belt through the front and bottom of the seat.
4. Installation step four: The last step is to connect the seat belt. Don’t underestimate this step. If the seat belt is not completely pulled out, you will have to re-install it at this step. Install.
5. Installation step 5: It is more troublesome to operate in the opposite direction. There are two places to fix here. The first is the fixing clip on the back of the child seat. The second is the fixing clip on the back of the child seat. The second one is passed under the child seat and connected to the seat belt interface.
2. Graco safety seat installation
1. First, Make sure the vehicle seat is positioned to match the infant seat you want to install. Check your vehicle manual for seat safety recommendations.
2. Open the baby seat and check the bottom and side fasteners. These parts should be complete, noHas damage or wear.
3. Place the infant seat on the vehicle seat. Make sure the seat matches the shape and size of the vehicle\’s seats.
4. Make sure you can use the seat belts that come with the vehicle seat or need to use a specific locking system.
5. Pass the safety belt of the infant seat through the bottom and back of the seat. Make sure the seat belt is not twisted or crossed.
6. Press the infant seat firmly onto the vehicle seat. Make sure the seat fits snugly into the vehicle seat.
7. If necessary, secure the infant seat to the vehicle seat using a vehicle seat belt or a specific locking system.
8. Check whether the seat and seat belt are secure. You can try gently shaking the seat and seat belt with your hands to check if they are secure.
9. Place the baby in the infant seat, fasten the seat belt and adjust it to the appropriate position.
10. You can confirm whether all steps are correct in the vehicle manual, or contact the baby seat manufacturer for more assistance.
3. Disassembly of Gray Nautilus Safety Seat
First, adjust the safety seat headrest to a high position (some seat headrests can be adjusted);
Press the shoulder strap adjuster and adjust the shoulder strap to a higher position. In a relaxed state;
Open the buckle, separate the shoulder straps to the left and right, and place them on both sides of the seat;
;\”>After taking out the child, fasten the five-point buckle and shorten the shoulder strap;
Use your fingers with both hands to use the sides of the safety seat or use your knees to hold the seat first Push the chair inward, then press the red button with both hands at the same time, and push it hard back
4. How to choose a safety seat
About the baby safety seat, the baby seat is not the baby car safety seat.Full seats, so not exactly the same rules apply. Infant seats should have labels indicating they meet safety standards. Therefore, when choosing, carefully check the weight guide provided by the manufacturer. When the child exceeds the weight, there is no need to continue using it.
For safety guidelines when using, please refer to the following:
1. Do not leave children behind In an infant seat, unattended.
2. Do not use a household safety seat instead of a baby car safety seat. The baby seat is only used to support the baby so that he can look around and eat. thing.
3. Be sure to wear a seat belt when using a safety seat.
4. When choosing, try to choose a baby seat with an external frame to ensure that the child will not fall. At the same time, ensure that the base of the seat is wide, so that Will not turn over.
5. Try to avoid choosing materials with slippery bottoms for baby seats. If the safety seat you have purchased is made of slippery material, you can cut two thin pieces of rubber and stick it on the bottom so that it will not slide when the baby seat is placed on a smooth place.
This ends the introduction to graco safety seats and graco safety seat installation. I hope it will be helpful to everyone.
