Hello fellow veterans, today I will share with you some knowledge about mouth glue and the instructions for using silk mouth glue. I hope it will be helpful to you. If it can help you, please pay attention to this site and bookmark it. Your support is our biggest motivation. Thank you everyone. Let’s get started!
Contents of this article
1. Sealing Glue mouth method
1. Use several layers of plastic cloth to seal the bottle mouth with unused glass glue and tie it firmly with a rope. You can also use raw material tape. The glass glue bottle has been opened and should be used up within a short period of time. If the glass glue has not been used up, the glue bottle must be sealed. When using it again, the bottle mouth should be unscrewed, all blockages should be removed or the bottle mouth should be replaced.
2. The most common problem with glass glue is turning black and moldy. Even using waterproof glass glue and anti-mold glass glue cannot completely avoid such problems. occur. Therefore, it is not suitable for construction in places where there is water or immersion for a long time.
2. Instructions for using silk gum
1. 1. For best results, thoroughly clean the material\’s interior and exterior surfaces and allow to dry.
2. 2. If the material is non-reactive metal or unknown material, spray accelerator 7649 on the mating surface and let it dry for 30 seconds.
3, 4. For textile glue to block the nozzle, avoid contact with metal substances.
4, 5. For through holes, apply glue to the mating areas of the bolt and nut.
5, 6. For blind holes, glue is dispensed at the location of the blind holes. When assembled, the internal air will be exhausted
6, 7. For sealing applications, apply product to external threads (360°) leaving the first thread uncoated and filling the entire thread gap with adhesive. For larger threads and gaps, the amount of adhesive can be adjusted and product applied to internal threads. superior.
7, 8. Assemble the bolts according to normal operations. When tightening to the required torque, torque compensation is not required.
OK , this article ends, I hope it will be helpful to everyone.
