Many friends don’t know much about how to solve the problem of no sound on the computer and how to solve the problem of the computer not being able to listen to recordings. Today, the editor will share it with you. I hope it can help everyone. Below Let’s take a look!
Contents of this article
- How to solve the problem of no speakers on the computer
- How to solve the problem of no sound on a new computer
- How to restore the sound of a new computer? Is the speaker good
- What should I do if the speaker does not sound after plugging it into the computer
- Listen to the computer How to solve the problem of not recording?
- If the computer microphone has no sound, it can be restored to normal with one click
1. How to solve the problem if the computer has no speakers
1 Uninstall the sound card driver and reinstall it (there is no driver disk available online) Or go to their after-sales service.) 2 The sound card driver does not match (change the driver or press F8 to match it manually when booting) 3. Go to their after-sales service and find an expert to find a repair shop. (If neither of the above two works, then it is basically a hardware problem.) 4 Look at the picture to confirm that there is no red cross in the computer management device management == (this should be ranked first)
2. How to solve the problem of no sound in a new computer
1. Check whether the motherboard\’s sound card driver is installed.
2. After the driver is installed, is there a small speaker in the lower right corner? If so, place the mouse on it and right-click to see the various aspects of the sound. If you don\’t see the small speaker, go to the device manager and see if there is a yellow mark or question mark on the sound hardware. If so, reinstall the driver.
Just use Computer Manager to update the driver.
1. Open Tencent Computer Manager and click \”Toolbox\”.
2. Find \”Hardware Detection\” in the toolbox.
4. Click \”Driver Installation\” in the hardware detection.
5. You can see the \”Installation Status\”. If it is not installed, you can click to install it directly.
3. How to restore the sound of the computer if the speaker is good
1. The computer sound is gone, but the speakers are good. There are two main reasons. The first is that the page you are browsing has turned off the web page sound in the lower right corner, so there is no sound on the web page.
2. The second reason is that the plug and jack of the speaker are loose, so no sound comes out. You can follow two methods to test the sound repair in sequence.
4. What to do if the speaker does not sound after plugging it into the computer
First open the computer settings interface and click System.
Check whether the output device is disabled. If it is disabled, click directly on the name of the disabled device.
5. What to do if the computer cannot listen to the recording
If you Your computer cannot play the recording. You can take some of the following measures to solve this problem:
1. Check the audio device: If your computer has no sound when playing the recording , please check your external microphone and speakers to make sure they are connected properly. If you are using the built-in speakers and microphone, make sure they are not damaged.
2. Check the volume setting: Check whether the volume setting of your computer is correct. You can try increasing the volume to make sure it is correct and not muted.
3. Update the audio driver: If your audio driver is out of date, it may cause poor sound effects. You can learn about the latest drivers from your computer manufacturer\’s website and install them.
4. Change the default audio device: If you have multiple audio devices connected to your computer, issues related to the default device may occur. You can resolve this issue by changing the default audio device or running a troubleshooting tool.
5. BroadcastPlayer issues: Try playing the recording on your computer using a different player to see if the problem is related to your player.
If none of the above solutions can solve the problem, it is recommended that you seek professional technical support.
6. The computer microphone has no sound and can be restored to normal with one click
1 , First, right-click the \”Sound\” icon in the lower right corner.
2. Then move the mouse over the sound and right-click to bring up the menu, then click \”RecordingDevice\” when the menu appears.
3. Then, when you enter the sound interface, open the second option \”Record\”.
4. Enter the recording interface and set the microphone as \”default device\”.
5. Then say a few words into the microphone and see if the microphone makes sound.
6. If there is no sound, please click \”Properties\” in the lower right corner of the microphone.
7. Then in the general interface, open the device usage at the bottom and set the microphone to enabled.
8. Then turn on \”Level\” and set the microphone sound to the maximum, which is the first one. At this time, make sure to go out and check if there is any sound. Do not enter this interface again, increase the \”microphone boost\” sound, and then make sure to go out and try if there is sound. .
9. Then click \”Advanced\”, enter and change the sampling frequency, change the original frequency, and try again.
10. When the sound ends, turn on \”Enhance\” and set it to eliminate echo and sound.
The article ends here. What to do if the computer has no sound and what to do if the computer cannot listen to the recording have solved your problem. Then we Sincerely happy!
