Hello everyone, today I will answer some questions about how to use the self-test kit, including how to use the singclean kit. Many people don’t know yet, so what? , let’s analyze it for everyone today, let’s take a look together now! If your problem is solved, I hope you will pay attention to this site, thank you~
Table of contents of this article
- What is the liquid in the antigen reagent tube
- What does the hotgen kit detect?
- How to use ab153x detection Loda chip
- How to use formaldehyde kit
- How to use the swimming pool water quality test kit
- How to use the singclean kit
1. What is the liquid in the antigen reagent tube
The liquid used for antigen detection is generally called a buffer.
Most of the liquid in the new coronavirus antigen detection kit is physiological saline, and some is Tris-HCL, surfactant, purified water, and Tween-20 , PBS, Brij58, ultrapure water, etc.
2. What does the hotgen kit detect?
1. The hotgen kit is used to detect the gene sequence of living organisms
2. Because for different living organisms, the gene sequence has different Specific, and the hotgen kit can perform batch testing based on different gene sequences, and is suitable for various analyzes such as gene quantification
3. The hotgen kit is available It has important application value and practicality in many fields such as medicine, environment, and aquaculture
3. How to use the ab153x detection Loda chip
1. To use ab153x to detect the Roda chip, you need to add the sample to the chip first, then perform steps such as washing and staining, and finally use the corresponding instrument for detection.
2. For specific operation steps, please refer to the instruction manual of the test kit.
3. It should be noted that contamination and misoperation need to be avoided during the operation. , to ensure the accuracy of the test results
4. How to use the formaldehyde kit
1. The method of using the formaldehyde detection kit is to open the box first, take out the reagents, then put the reagents into the box and seal it.
2 , then, place the box in the area to be tested and keep it in place for 4 hours, then open the color change plate in the box extraction reagent, and compare the standard color on the color plate to determine the formaldehyde concentration.
3. The formaldehyde detection kit needs to be used at an appropriate ambient temperature, and each reagent can only be used once, because the reagents may be contaminated by gas or affected by water vapor, so be sure to confirm before use. The reagent bottle cap has not been opened, otherwise it will affect the detection effect.
4. If the space to be tested is large, multiple detection boxes are needed for testing. To obtain more accurate results
5. How to use the swimming pool water quality testing box
Swimming pool water quality testing kit is a tool used to test swimming pool water quality, usually including multiple test tubes and reagents. The following is how to use the swimming pool water quality testing kit:
1. Preparation work: First, you need to collect swimming pool water samples into test tubes. You can use a special sampler or manually put the test tube into the swimming pool, fill the test tube with water and take it out.
2. Add reagents: According to the marking line on the test tube, drop the reagent into the test tube. Different test tubes require different reagents, and the specific reagent types and Please refer to the instructions of the test box for the amount to be added.
3. Shake well: Cover the test tube and shake gently to thoroughly mix the reagents.
4. Wait for the reaction: According to the time requirements on the test box instructions, wait for a certain period of time to allow the reagent to fully react with the water sample.
5. Observe Result: According to the marking line on the test tube, place the test tube against a white background and observe the color change. You can judge whether the swimming pool water quality meets the standard based on the color change.
6. Clean the test tube: After the test is completed, the test tube needs to be cleaned to prevent reagent residue from affecting the next test.
It should be noted that the swimming pool water quality is tested. The box can only be used as a preliminary testing tool. If problems with the swimming pool water quality are found, corresponding measures need to be taken promptly to deal with it. At the same time, when using the swimming pool water quality testing box, you need to operate according to the instructions in the instructions to ensure the accuracy of the test results.
6. How to use the singclean kit
1. First tear it Open the sampling swab packaging bag and take out the swab
2. Put the head of the sampling swab into the nasal cavity for sampling
3. Dip the swab into the sample extraction buffer, and lean against the tube wall to rotate repeatedly for 10 seconds
4. Take out the swab Cover the cap and shake the tube gently to fully mix the internal solution
5. Wait for 15 minutes. If there is 1 bar, it means there is no sheep, and 2 bars means there is no sheep. Sheep
The article sharing is over. Do you know the answers to how to use the self-test kit and how to use the singclean kit? Welcome to visit this site again!
