Hello everyone, today the editor is here to answer the question of no sound from the computer speakers. Many people don’t know that the computer’s built-in speakers have no sound. Now let’s take a look. !
Contents of this article
- Why is there no sound when the stereo is plugged into the computer
- The computer’s built-in speaker has no sound
- The computer displays sound but the speaker has no sound >
- Why is there no sound from the computer speakers?
- The computer speakers suddenly have no sound
- How to set up the computer speakers if they don’t sound
1. Why is there no sound when the audio is plugged into the computer?
Using the audio for a long time will cause the internal circuit to age, resulting in contact when the audio is connected to the computer. Bad, there is no sound.
If the audio cable is not connected properly, it will also cause no sound after the audio is plugged into the computer.
3. The sound volume is switched to mute or too low
It may be accidental Set the volume to mute, resulting in no sound. To solve this problem, just turn on the mute button.
It may be that the computer sound card is broken. At this time, you can try replacing a new sound card.
2. The computer’s built-in speaker has no sound
1. Computer The speaker cable is not connected properly, the speaker is not turned on, the volume of the speaker is at the minimum position or the speaker is not powered, or the audio output and input interfaces on the back of the sound card are plugged in backwards. This causes the computer to have no sound.
2. In the volume control in the lower right corner of the computer screen, control the volume to the minimum or set it to mute.
3. The computer is infected with a Trojan virus. The virus destroys files related to audio processing, especially Dsoun.d related system components are damaged by viruses.
4. The program related to the sound card driver is damaged or the driver is installed incorrectly, and an unsupported device driver is installed.
3. The computer displays sound but the speaker has no sound
1. The hardware is damaged or the connection is incorrect. The lack of sound from the computer audio may be due to hardware problems. In this case, the only option is to take the audio for repair or replace it directly. It is also possible that the speaker cable is not plugged in properly or the switch is not turned on. As long as all the connecting wires are connected correctly Just connect, turn on the switch and volume. 2. The sound card driver is incorrect 1. Right-click \”My Computer\”, then click \”Properties\”, select \”Device Management\” in \”Hardware\”, and click \”View Devices by Type\”. 2. There is an option for \”Sound, Video and Game Controllers\” in the window. Pay attention to whether there is \”×\”, \”?\” or \”!\” below. If so, it means that the computer sound card driver is incorrect and you need to reinstall the sound card driver. 3. Right-click \”Legacy Audio Driver\”, select \”Update Driver\”, click \”Yes, only this time\”, select \”Next\”, and then you will see the option of \”Automatically install software\”. After selecting, the computer will Automatically search for drivers online. 4. After the search results come out, just follow the computer prompts to install.
4. Why there is no sound from the computer speakers
1 There may be many reasons why there is no sound from the computer stereo.
2. First, check whether the speaker is correctly connected to the computer and make sure the audio cable is plugged into the correct jack.
3. Secondly, confirm whether the volume setting is correct. The volume may be muted or turned down. Also check your computer\’s audio settings to make sure the audio output device is selected correctly. If none of the above methods solve the problem, the audio driver may be faulty and the driver needs to be updated or reinstalled.
4. Finally, if none of these work, the speaker itself may be faulty. It is recommended to contact professional technicians for repair or replacement.
5. The computer speakers suddenly have no sound
The answer is as follows: There are several possible reasons why the computer speakers suddenly have no sound:
1. Volume setting problem: First, check whether the computer volume setting is correct. Make sure the volume is not muted or turned down to the point where the sound cannot be heard.
2. Audio driver problem: There may be a problem with the audio driver that causes the speaker to be silent. You can try to reinstall or update the audio driver to solve the problem.
3. Audio cable connection problem: Check whether the audio cable connection between the speaker and the computer is loose or damaged. If so, please replug or replace the audio cable.
4. Speaker hardware failure: If none of the above methods work, there may be a hardware failure in the speaker itself. You can try to connect the speaker to other devices to test whether there is sound. If there is no sound from other devices, it may need repair or repair. Replace the speaker.
If none of the above methods work, it is recommended to contact after-sales service or professional maintenance personnel for repair.
6. How to set up the computer speakers if they don’t sound
If the computer speakers don’t sound, first make sure the speakers are correctly connected to the computer’s audio output interface. Then, check the computer\’s volume settings to ensure that the volume adjuster is adjusted to the appropriate position. You can also try to adjust the computer\’s audio settings, such as checking the default audio device, adjusting balance and gain, etc. If the problem persists. Update the audio driver or try to connect other audio devices to troubleshoot the problem with the speaker itself. If none of the above methods work, you may need to contact a professional technician for further troubleshooting.
This is the end of the introduction about computer speakers having no sound and computer built-in speakers having no sound. Did you find the information you need? If you want to know more about this, remember to bookmark and follow this article. station.
