Today I will share with you the knowledge about why the soymilk maker stops spinning. It will also explain why the soymilk maker stops spinning after spinning. If it can happen to solve the problem you are facing now Questions, don’t forget to follow this site and get started now!
Contents of this article
- Why does the soymilk machine spin in one circle and stop spinning
- a>
- Why is the soy milk machine not spinning?
- The soy milk machine is not spinning What\’s going on? It suddenly stopped spinning during operation
- The reason why the soymilk maker stopped spinning
- What\’s going on when the soymilk maker is powered on and everything is normal but it doesn\’t spin?
- What\’s going on when the soymilk maker suddenly doesn\’t spin >
1. Why does the soymilk machine spin once and stop spinning
Let me answer this question. If the soymilk machine spins once and stops spinning, it is possible that you have put too much food in it. If you have not put too much food in it, the soymilk machine is broken.
2. Why does the soymilk machine not spin?
1. On the one hand, the reason may be that the motor is damp, causing a short circuit. Because when we squeeze soy milk, we add water to it, and accidentally spill the water on the motor, which causes a series of problems.
2. It is also possible that the soymilk machine has been used for a long time, causing the temperature of the soymilk machine to be too high. Because when there are many people in the family, squeezing the soy milk once is not enough, so you can only continue to use the juicer to squeeze. The temperature of the soy milk machine is too high, which is also prone to problems.
3. Another problem is that water enters the internal machine, causing a short circuit. At this time, the soymilk maker will also stop running. What tends to happen is that the motor gets damp when squeezing soy milk, causing water to enter the machine. If you are not careful when cleaning the soymilk machine, water may easily enter the machine.
3. What’s the matter with the soymilk machine not spinning? It suddenly stopped spinning during operation
1.ElectricitySource failure: Check whether the plug and power cord are properly connected and try to replace the socket or power cord.
2. The fuse is blown: Check whether there is a fuse inside the soymilk machine. If there is, check whether it is burned out and needs to be replaced.
3. Motor failure: The soymilk machine motor may be damaged due to long-term use or abnormal use, and the motor needs to be replaced.
4. The rotating shaft is stuck: Check whether the rotating shaft is stuck. It may be due to debris inside the soymilk machine or soy milk and other substances that jam the rotating shaft and needs to be cleaned.
5. Switch failure: Check whether the switch of the soymilk machine is normal. If there is a fault, replace it.
If the above methods cannot solve the problem, it is recommended to contact professional maintenance personnel for repair.
4. Reasons why the soymilk maker does not spin
The soymilk maker does not spin The reasons may be as follows:
1. Power supply problem: Please check whether the power supply of the soymilk machine is normal and whether the power cord is plugged in. Try other Reconnect the power cord to the outlet.
2. Button problem: It may be that the start button is faulty or broken, or it may be that the switch is malfunctioning. It is recommended to check whether the button can be pressed normally and whether the surface is clean and free of impurities.
3. Improper machine care: Soymilk machines need to be cleaned and maintained regularly. If cleaning work is not carried out for a long time, bean dregs or bean dregs will stick to the inside of the machine or on the blades. This will cause difficulty in turning.
4. The pulley is partially blocked: The pulley may be stuck by residual bean dregs, sesame seeds and other substances, making the equipment unable to start.
If the above methods have been checked and the problem is not solved, please do not open the soymilk machine for repair by yourself. It is recommended to contact a professional for repair or replacement.
5. When the soymilk machine is powered on, everything is normal but it does not spin.
When squeezing soy milk and pouring water into it, the motor may be accidentally stained with water, causing the coil toshort circuit. When cleaning the soymilk machine, it is easy for water to enter the soymilk machine, which will cause it to get damp. If it gets damp, it will make it difficult to operate the soymilk machine. Therefore, you must be careful not to let water into the soymilk machine. If there is water, wipe it dry immediately with a rag.
When I find that the soymilk maker is not spinning, the first thing that comes to mind is a circuit problem. After plugging in the power, if you find that the power indicator light is not on, then the power supply is not plugged in properly. If the power indicator light is on but the soymilk maker is not running, then you need to check whether the motor is stuck or not rotating properly.
During the process of using the soymilk machine, the carbon accumulated by the friction of the carbon brushes will gather in the gaps, and then mix with water vapor, and it will condense into hard lumps. If the carbon brush is stuck, the carbon brush and the rotor will not be in good contact, or even not in contact at all, resulting in the soymilk machine not spinning, so the carbon brush should be cleaned in time.
6. Why does the soy milk machine suddenly stop spinning
1. On the one hand, the reason may be that the motor is damp, causing a short circuit. Because when we squeeze soy milk, we add water to it, and accidentally spill the water on the motor, which causes a series of problems.
2. It is also possible that the soymilk machine has been used for a long time, causing the temperature of the soymilk machine to be too high. Because when there are many people in the family, squeezing the soy milk once is not enough, so you can only continue to use the juicer to squeeze. The temperature of the soy milk machine is too high, which is also prone to problems.
3. Another problem is that water enters the internal machine, causing a short circuit. At this time, the soymilk maker will also stop running. What tends to happen is that the motor gets damp when squeezing soy milk, causing water to enter the machine. If you are not careful when cleaning the soymilk machine, water may easily enter the machine.
1. The series motor in the machine got wet, causing the coil to short-circuit, causing the motor of the soy milk machine to not rotate.
Solution: At this time, the series motor needs to be replaced to make the soymilk machine work normally.
2. The relay cannot be closed or the legs are broken.
3. Continuous use for a long time will cause the temperature of the series motor to be too high, and the motor of the soy milk machine will also not rotate.
Solution: Turn off the soymilk machine, suspend use, and let itThe motor slowly cools down.
4. Improper use resulted in water entering the machine and a partial short circuit on the computer board.
Solution: Use a hair dryer to dry the computer board and the moisture inside the machine.
1. Heating: Plug in the power, and after the program starts, the electric heater will start heating at full power. When using normal temperature water after about 8 minutes, the water temperature will reach the beating setting temperature.
2. Pre-beating: When the water temperature reaches the set temperature, it needs to be pre-beaten, and then heated at full power to reach the set water temperature.
3. Beating: When the water temperature reaches the set temperature again, the motor starts to work, and the motor drives the blade to beat multiple times.
4. Boiling: After the pulping is completed, the electric heater continues to heat at full power until the soy milk boils for the first time.
5. Anti-overflow and delayed cooking: After the soy milk boils for the first time, the anti-overflow heating function of this machine will automatically start and enter the power-down extended cooking process. The electric heater heats intermittently to allow the soy milk to boil repeatedly to fully cook and prevent overflowing.
6. Power-off alarm: After the soy milk is made, the electric heater, motor and other components will automatically cut off the power, and the machine will issue an audible and visual alarm to indicate that the soy milk has been made. good. Just unplug the power plug.
This is the introduction of the soymilk maker not spinning. Thank you for taking the time to read the content of this site. More about why the soymilk maker stops spinning. Don’t forget to search this site for information on whether the soymilk machine has switched or whether it has stopped working.
